Product classification
產品規格 | 單位 | HXYD160 | ||||||||
合模單元Clamping Unit |
| |||||||||
合模力Clamping force | kN | 1600 | ||||||||
移動模板行程Moving mould-plate stroke | mm | 420 | ||||||||
最大模厚 Max.Mould height | mm | 530 | ||||||||
最小模厚Min.Mould height | mm | 150 | ||||||||
拉桿有效間距 Space between tie-bars | mm | 520*470 | ||||||||
液壓頂出力Hydraulic ejector force | kN | 68 | ||||||||
液壓頂出行程 Hydraulic ejector stroke | mm | 130 | ||||||||
頂出點數Ejector number | n | 5 | ||||||||
注射單元Injection Unit | i350 | I450 | I650 | |||||||
螺桿直徑Screw diameter | mm | 32 | 36 | 40 | 36 | 40 | 45 | 40 | 45 | 50 |
螺桿長徑比Screw L/D ratio | L/D | 23.6 | 21 | 21 | 23.3 | 21 | 21 | 22.5 | 20 | 20 |
理論注射容積Injection capacity in theory | cm3 | 144 | 183 | 226 | 183 | 226 | 286 | 263 | 334 | 412 |
注射重量Injection weight（ps） | g | 131 | 166 | 205 | 166 | 205 | 260 | 240 | 303 | 375 |
注射壓力Injection pressure | MPa | 2531 | 2000 | 1620 | 2469 | 2000 | 1580 | 2531 | 2000 | 1620 |
注射速度Injection velocity | mm/s | 350 | 350 | 350 | ||||||
塑化能力 Plasticizing capacity | g/s | 16 | 22 | 30 | 20 | 30 | 42 | 30 | 42 | 50 |
螺桿轉速 Screw speed | rpm | 400 | 400 | 400 | ||||||
其他Other |
| |||||||||
油泵壓力Pump pressure | MPa | 17.5 | ||||||||
驅動功率 Motor/Driving power | kW | 37(注）+23（熔）+18.5（油） | 37(注）+23（熔）+18.5（油） | 37(注）+23（熔）+18.5（油） | ||||||
加熱功率 Heating capacity | kW | 8.2 | 10.5 | 13.55 | ||||||
外形尺寸 Machine dimension | m | 5.2*1.49*1.61 | 5.90*1.49*1.72 | 5.61*1.49*1.82 | ||||||
機器重量 Machine weight | t | 6.5 | 7.8 | 8.0 | ||||||
油箱容積 Oil tank capacity | L | 190 | ||||||||
您當前所在位置：首頁 < 
